RSS Feed

Tag Archives: restoration

Maiden Voyage

Posted on
Maiden Voyage

Last weekend, I took Junebug on her maiden voyage to Austin.  I was going for a friend’s baby shower, and my friend, James, who lives in Austin offered to let me park the camper in his driveway for the weekend.  I figured this would be a safe test run environment, just in case I got there and my electricity didn’t work or some other disaster happened.   My friend, Jennifer, rode with me to Austin.   I was super nervous as we set out on the highway.  After all this time and money that I’ve now invested in Junebug, I didn’t want anything bad to happen!  I realized shortly after we left Houston that I hadn’t increased the insurance coverage on the camper since I bought it.  I called my insurance company while driving and added $10K more coverage, just in case!  Luckily, I didn’t need it this time, but it’s always better to be safe than sorry!

IMG_2547I noticed Junebug was swaying from side to side a bit when a big truck passed or a gust of wind hit us.  I was pretty sure the new bumper and off center spare tire attached to it were partly to blame because she didn’t do that when I first drove her home from New Mexico.  Even still, we made it to Austin in one piece and I parked her (with some difficulty) in James’ driveway.  Unfortunately, James has a gravel driveway with a slight incline and then a steep drop off  behind it that leads to his beautiful backyard with a little stream and waterfall.  The last thing I wanted was for Junebug to become some yard art suspended over his waterfall.   eek  I usually have no trouble rolling Junebug into my own paved driveway using the castor wheel attached to the jack.  Unfortunately, due to the slight incline and gravel in James’ driveway, it took Jennifer pushing and me pulling just to get her turned around.  After turning her around so that the front door faced the house, I gave up and decided she was good where she was.  She was tilting a bit to one side, so I felt like I was in the fun house when I stepped inside. haha

Filled with anxiety, I went to plug her in for the first time since getting off the highway.  Much to my relief, everything worked!  I touched all of the metal with the voltage meter before touching it with my hand, just in case something had come loose.  Luckily, that was not the case.  I even plugged in the fridge, and it works great too! biggrin

I hung the little camper lights that a friend from work gave me.  They look so cute hanging on Junebug at night and during the day!

IMG_2553

IMG_2559

IMG_2567

These are the cute little hand towels that my coworker Alyssa gave me for a “camper warming” gift. I love them!

Saturday morning, I plugged in the cappuccino machine to make my first cup of coffee in Junebug.  Since I wasn’t plugged into a 30 amp outlet (I was using my adaptor and plugging into a normal household outlet), I decided it was best to unplug the fridge while running the coffee maker, just in case.   The coffee came out great and no electrical issues!

IMG_2556

Camping in style with a cappuccino. My mom gave me the cute little mug.

I finally got all the letters in the mail to spell Junebug, so they got to go with me on the maiden voyage.  So cute!  I got those as well as several other camper-themed items from www.naturallife.com.  They have the cutest camper stuff!

IMG_2565IMG_2570

After a fun-filled weekend, it was time to head home.  On the way home, I got stuck behind a huge semi hauling some big piece of equipment.  I tried to pass, but Junebug started swaying so much from the wind displacement that I freaked out and had to slow way down.  We then decided to stop at Buc-ee’s for gas, and I removed the spare tire from the bumper and put it inside my car.  I noticed this helped quite a bit the rest of the trip.  I got a few honks and a few guys who stopped by while we were at the gas station, wanting a look inside.  Junebug is quite the head-turner!

IMG_2571 IMG_2572

This weekend, I decided to go back to Master Hitch and get a sway bar installed on the hitch.  I will probably still travel with the spare tire inside the camper instead of on the bumper,  but I wanted the sway bar for added protection when trucks are passing.  It really makes a difference, and only cost $100 with installation!  Totally worth the money in my opinion.

IMG_2588

This is a sway bar. It attaches to two different balls, one that is bolted to the side of the hitch, and another little ball that is welded onto the side of the main ball that the hitch is locked into. It creates tension between the car and the hitch, keeping it from swaying side to side as much.

My first vintage camper rally is next weekend, so this weekend I wanted to build my new screen door so that I would have it for the rally.  It took me a few days because I could only work on it a little at a time.  I just finished and installed it this evening and I’m very pleased with the result!

IMG_5253

I picked up the birch a few weeks ago from Houston Hardwoods, but unfortunately it was too wide (I had gotten 1″x4″). I took it back this weekend and they cut it for me so that I had thinner pieces. It worked much better this size.

IMG_5254

Frame is all ready to go. I used 3″ screws to hold it together.

IMG_5255

I put several coats of amber shellac on it Friday and Saturday. Today, I started installing the screen. I used tinted aluminum screen material.

IMG_5256

I folded the aluminum screen over once at the edges and then used my crown stapler to attach it to the frame. I tried to get it as tight as I could.

IMG_5257

One half done!

IMG_5262

To cover the staples, I cut 1/2″ strips of birch paneling and nailed them down using twist nails.

 

IMG_5260

Next, I cut two identical pieces of birch paneling to be sandwiched together to fill in the center of the door.

IMG_5261

I used a couple of trim pieces to finish off the center of the door.  It will be cut in half with hinges so that half of it opens to make room for the door handle when both doors are open or closed.

IMG_5268

You can see the little hinges I installed on the interior so that the center of the door opens to the side.

IMG_5265

Here’s the front! I used the same drawer pull that I used on the interior drawer for the handle. I think it turned out pretty nice!

IMG_5266

All ready for the rally!

I’m getting excited for the rally next weekend!  I still have a lot of work to get done this week, but hopefully I’ll be able to get everything done and relax this weekend.

Party Time!

Party Time!

I’m a little overdue for this post, sorry!  I had my unveiling party last Friday, and I think it was a huge success!  The next day, I ran a 5K (Wicked Wine Run, 5K and then wine tasting at the end haha) and then on Sunday, I rested.  I had a pretty busy week at work, so I am just now getting around to writing an update on here about the festivities.  I will start by sharing some photos of Junebug after I got her all ready for the party.  I was very pleased with how she turned out, even though I still have a few more things to complete (screen door, baggage door, trim around bottom edge of exterior).  The day of the party, I hopped out of bed at 6am, eager to finish making all of the preparations.  I think that’s the first time in my adult life that I’ve ever gotten up that early on my own for something non-work related.  haha

+IMG_5078

View of the tongue with my custom painted tank. I still need to take it to a propane place to see if they’ll actually service this tank. If not, I guess I’ll have to resort to getting a new one. Fingers crossed they’ll accept this one since I put so much work into it!

+IMG_5082

I think she looks quite pretty with my roses in the foreground. 🙂

 

+IMG_5090

Another view.

+IMG_5094

She had to have these little twinkle lights.

+IMG_5104

+IMG_5099

Street side. The new 30 amp stainless inlet looks pretty good here I think.

+IMG_5105

The wind chime hanging on the door was a gift from a coworker that she picked up in Alaska. My coworkers have been so supportive throughout this project!

+IMG_5122

Little measuring spoon set that a coworker gave me. They have owls on them!

+IMG_5121

A little more decor for the kitchen.

+IMG_5116

I added some magnets to the fridge and a larger magnet on the stove. Of course, it has an owl on it. 🙂

+IMG_5119

+IMG_5115

I think the starburst patterns on the benches turned out pretty cool.

+IMG_5114

The framed hipster owl. I also have a couple of fun books on glamping and trailer history.

+IMG_5112

+IMG_5111

A better view of the bed and benches. So cozy!

+IMG_5109

+IMG_5124

Little bathroom complete with vintage trailer reading material (not that I’ll be spending a lot of time in here). haha

I had about 40 people show up for the party, and it was a great time!  Everyone was very excited to see the finished product.  I asked everyone to dress up in 1950s/60s outfits to get in the mood.  I ordered my dress, shoes, and petticoat from www.pinupgirlclothing.com.  I love that site!  They have the cutest pin up clothes, and the quality is great.

pIMG_5135_edited-1

My best friend, Jennifer, and I all dressed up for the party!

pIMG_5142_edited-1

My coworker, Natalie, and her husband, Kevin.

pIMG_5145_edited-1

This is my friend and stylist, Josafatt. He did my hair! I wish I could do it this way every day, it was so fun!

Jen&Ayk

Jennifer and her boyfriend, Ayk.

IMG_5167

Everyone is gathered around for the big unveiling!

pIMG_5148

I had the tarp over Junebug so that I wouldn’t spoil the surprise.

pIMG_5163

And here she is!!

pIMG_5169_edited-1

I’m about to open the door to let everyone take a peek inside!

pIMG_5173

My friend, Thomas, spared no expense and brought multiple bottles of Veuve Clicquot to celebrate the big event!

pIMG_5179_edited-1

Cheers!! I’m overjoyed to be done (almost) with this big project!!

cheers_edited-1

I tried to give a speech here but it wasn’t the best since I didn’t prepare ahead of time, oh well, hoepfully no one cared. haha

pIMG_5198_edited-1

Here I am about to christen Junebug. I didn’t want to waste any Veuve Clicquot, so I used a bottle of beer instead. 🙂 To be safe, I wore my cut resistant gloves donated to me by my neighbor, Jarred.

pIMG_5187

Baxter loves a good party!

I was supposed to go to the TCT vintage camper rally in Lake Charles, Louisiana this weekend.  Unfortunately, I am having problems with my tail lights and I decided I couldn’t go.  I didn’t wire them myself, I had Oscar do that, and now they don’t work properly.  confused  The weird part is that they work fine when they’re plugged into Oscar’s Ford Explorer.  For some reason, they don’t work right when connected to my VW Tiguan.  I’m sure it’s some kind of compatibility issue, but I don’t know how to fix it.  I’m taking Junebug to the place that installed my wiring and hitch on the Tiguan either tomorrow or Saturday morning, depending on the weather.  I even ordered new tail lights from www.vintagetrailersupply.com and that didn’t fix the problem.

My plan for the weekend is to hopefully get the tail lights fixed, then finish building the new screen door.  I also borrowed a soldering iron from my friend Casey’s boyfriend, so that I could solder all of the wire connections together in the camper.  I am still a little nervous they might come loose while I’m towing the camper somewhere and then become hazardous when I’m camping due to exposed wires.  I thought if I really wanted to be on the safe side, I could solder the wires together and melt some shrink wrap over them to ensure they don’t come apart.

I am planning to go to Austin next weekend for a baby sprinkle, so I’m thinking I may take Junebug there for the first big trip since the restoration.  We’ll see, it all depends on the tail lights!  Either way, I’m definitely taking her to her first vintage camper rally the weekend of October 10-11 to join the Texas Vintage Trailer Club’s rally in Fentress, TX.  Can’t wait!

 

 

 

 

The Home Stretch, Part 3

The Home Stretch, Part 3

I had a rough weekend.  I didn’t even want to write a post yesterday because I was so frustrated, I just had to get away from it all.  I tried for a good part of Saturday to get the electrical system to work, and I felt like I wasn’t getting anywhere.  I didn’t want to get too far off track even though I couldn’t get the electrical system to work, so I still managed to cross a few other things off my list.

I had to run a few errands first.  I needed to pick up some Dicor lap leveling sealant to go around the seams on the Fantastic Vent on the roof.  Even though I sealed it first with putty tape, you still have to go over the top of that with the Dicor sealant to ensure it’s water tight.  I also had some seams that were exposed because my j-rail wasn’t covering them all the way so I got some Sikaflex sealant to cover those.  I don’t think it’s technically the way you’re supposed to do it, but I wanted the added protection since there were some areas exposed.  I got it in grey, so it doesn’t look too bad.  I still need to trim it in a few places where it got a little goopy.

IMG_5026

Here’s a pic before adding the Dicor. It’s just got the putty tape between the vent and the roof.

IMG_5027

I made this barrier to go around the vent because I wasn’t sure how much the sealant was going to spread and I didn’t want it going all over the place.

IMG_5028

Turns out I didn’t need the barrier. Oh well, better safe than sorry!

IMG_5029

Here’s a pic of the Sikaflex sealant I applied in the cracks of the j-rail. The top of the j-rail had a better seal because it was completely covering the seams. It was just on this side in some places where I had folded the roof over too far. I think I’ll trim it a little but it doesn’t look too bad.

It poured down rain today and I let Junebug get rained on for the first time in a long time.  I guess I figured I needed to test her seals out to see if anything leaked.  From what I could tell, everything stayed bone dry, so that was awesome!

I decided yesterday that maybe I wanted to put the old light fixtures back in the camper instead of the new crappy ones I bought.  I needed to clean up one of them because it had gotten rusty, probably due to getting wet because it was the one above the kitchenette.  While I was messing with the rusty fixture, the neutral wire broke off of the light socket.  ugh  Rather than throw out this fixture, which I still think is better than the new one, I decided to buy a new light socket and install it in the old fixture.  It worked great!

IMG_5024

Both old fixtures. The one on the right is rusted because it had been in the kitchen.

IMG_5025

One of the fixtures now has a new light socket.

I thought maybe my ground wire wasn’t getting a good connection with the frame of the camper, so I removed it and used my wire brush attachment for my drill to scrape off all of the paint from the frame.  I then reattached the ground to the frame and it didn’t help.  I decided to give up on the electrical after that and try again on Sunday.

Today, the first thing I did was go to Home Depot to buy a multimeter so I could start testing every connection of the electrical system to find the problem.  I didn’t want a really expensive one since this was probably the only time I would use it.  I ended up getting a Klein http://www.homedepot.com/p/Klein-Tools-Electrical-Analog-Multimeter-Test-Kit-69149/204367271.

IMG_5030

 

When I got home, I first tested the outlet in the garage that I was plugging the camper into.  It tested 120v which was the right voltage.  Then I went inside the camper and turned off both breakers inside the breaker box and tested the main power coming into the breaker box.  It also tested 120v, so I knew it wasn’t the power inlet or the cord I was using.  Since I have two circuits in the camper, one for the exterior plug and one for all of the interior wiring, I turned just the exterior plug breaker on first.  It was simpler since it’s only one plug for the entire circuit.  I did this on purpose because the AC will plug into this and it draws more power than anything else I will be using.  I tested the exterior plug and it worked great, showing 120v.  Next, I turned off that breaker and turned on the second breaker that powers the circuit for three outlets and two lights inside the camper.  I knew the problem was somewhere along this circuit.  I slowly went through the connections, one at a time, disconnecting the wires further down the circuit so I could isolate each one.  About halfway through, my stupid multimeter broke!!   At first I thought the outlet wasn’t working correctly, then I realized it was just the multimeter.  ugh.  I decided it was time for a lunch break so I could try to destress.  After that, I went back to Home Depot and returned the Klein multimeter and bought an even cheaper one made by Commercial Electric.  It worked just fine to finish the job.
IMG_5033

 

After disconnecting and reconnecting everything, the lights worked!!  I still don’t know exactly where the problem was.  It could have been the cheap fixtures I had in the camper before.  Or, it could have been a loose connection somewhere that I fixed when I reconnected everything.   Either way, I was just so relieved that it finally worked!!

After that, I knew I still needed to do a few more things.  I wanted to make a new garnish to go around the Fantastic Vent on the interior because I had done a crappy job trimming the plastic garnish that it came with.  I think my new custom garnish turned out much nicer than the plastic one anyway!

IMG_5040

 

I bought some nice birch wood for the screen door on Saturday, but I just didn’t have enough time to build it thanks to the stupid electric issues.  Oh well, I can always get to that later.

I also wanted to polish the wings today and install those, but I didn’t have time before dark.  Instead, I added a few more decorative items inside and then sat on the bed and had a glass of wine to celebrate.

IMG_5051

These owl glasses are actually from the 1960s, I picked them up at a vintage shop and love them!

IMG_5042

Owl never lose my keys again with this handy hook. 🙂

 

IMG_5054

This came on the vintage camper mug that my mom gave me for Christmas. I thought it was cute too so I saved it so that it could have a permanent home inside Junebug.

IMG_5056

I got this little sign when I was living in France. Since this is the bathroom (well…port-o-potty for nighttime emergencies only), I thought it was a cute little addition.

IMG_5055

I added some purple star twinkle lights above the bed. It’s so cozy now! I can’t wait to spend the night in it.

Only a few more days until my big reveal party!!  After that, I will post more pictures of the entire exterior and interior.  I can’t wait to show off all of my hard work! biggrin

 

The Home Stretch, Part 2

I had a pretty productive day!  Unfortunately, I also discovered today that my stupid light fixtures inside the camper still don’t work!  I don’t know what is the problem this time.  There seems to be power going to them and the outlets on the same circuit work when I plug in the main power inlet, so who knows.  I called the guy from RV Masters, and he’s going to come by tomorrow to have a look at them.  He’d better fix it!

The first thing I did today was paint the wheels.   The thing I hate about painting is all of the preparation that it takes.  It took me much longer to prep the area for painting than it did to do the actual painting.  Oh well, in the end, it was worth it!  I think they look pretty.  smile

IMG_4998

First, I had to clean the wheels with degreaser.

IMG_4999

All clean!

IMG_5000

Taped off and ready for paint (this part took a while)

IMG_5001

After a coat of primer

IMG_5002

Three coats of purple

IMG_5003

Street side after 3 coats of purple

IMG_5005

All done!

IMG_5012

You can see my reflection in the baby moon hubcap 🙂

While I was in the process of painting the wheels, I finished painting the closet too.

Later, after the paint was dry, I installed the vinyl wall map of the US on the closet wall.  I think it looks pretty cool!

IMG_5018

I also finished moving the exterior outlet and patching the previous hole.  I added some flexible duct work to lead to the vent for the AC on the interior of the camper.  I still haven’t added a vent cover, I’m not sure if I will, or if I’ll just attach another piece of duct work when I’m inside the camper to make the air flow upward toward the bed area.

IMG_5007

 

IMG_5009

I added another piece of paneling in front of the AC duct to cover it when it’s not in use. I can remove that piece to reveal another piece of paneling with a hole in it so that the air can flow out from the AC duct when I’m using it.

After finishing those things, I finished securing the drawer under the bed and added some support to the beams that hold up the bed cushions.  I also hung some pictures and installed the closet door.  I don’t want to show a picture of the entire interior until after my big reveal party next weekend, but I’ll share one of the street side, just to give you an idea.  biggrin

IMG_5014

So, if I look at my list again, here’s what I still have left for this weekend:

  • Install interior crown around Fantastic Vent (I think I may make one instead of using the plastic one it came with)
  • Install two emblems (Trailer Coach Association & small Shasta emblem)
  • Seal cracks and staples on exterior as well as vent on roof with sealant (need to pick this up from RV Masters)
  • Polish WINGS and reinstall (This will be my favorite part!)

If there’s time:

  • Build new screen door (forgot this in my last post)
  • Install baggage door
  • Install trim around bottom edge of exterior

I’m getting so close!!

biggrin

The Home Stretch

The Home Stretch

This is my last weekend to prepare Junebug for the big reveal party taking place next Friday, September 12th.  I have already received quite a few RSVPs because everyone is excited to see the finished product!   Luckily today is my Friday off, so I have three days to work on everything which should be plenty of time.

Last Tuesday, I had an electrician from RV Masters come out to take a look at my wiring job.  The only problem left was that the ground wire inside of the fixture above the bed had broken off (it was a really cheap fixture).  Once he added a new ground, everything worked perfectly!  I knew that was probably what was causing the fixture to be electrified, but I had gotten so frustrated last weekend, that I decided I had better just get an electrician out here either way, just to double check my work.   He said that everything else looked good, so I was excited that I passed the test!  smile

After he was finished checking my interior wiring, he wanted to take a look at my taillights.  I am still having trouble with them, the side running lights and license plate light don’t work when hooked up to my VW.  He said some mean things about the two guys who had messed with the wiring both on my car and on my camper.  All of these guys I’ve worked with think they are better than everyone else who works on trailers!  I guess they are all competitors so they can’t like each other.  haha   He initially thought it was how my VW was wired.  We checked it and that wasn’t the case.  He then determined it was Junebug due to a grounding issue.  He inspected the taillights because the side running lights were brand new.  He thought the taillights were too old and weren’t getting a good ground or a good connection with the bulbs.  So…I had to order new taillights.  Luckily, www.vintagetrailersupply.com has reproduction taillights that are exactly like the ones I have so the look with be the same.  The bad part is that they cost $120 with shipping.  ugh  They are supposed to arrive on Tuesday, and I’m going to try to install them myself first and see if that fixes the problem.  If it doesn’t, then I’m going to have to rewire the taillights to ensure they are getting a better ground connection.  Fingers crossed I can fish the wires out from behind the skin, insulation, and wood where I wedged them before so that they wouldn’t be compromised!

So, back to what I need to do this weekend.  I figured it would help me to make a list of everything to help me plan.

  • Move exterior plug to a better location and add j-box under the fridge to connect it to the interior wiring so that no wires are exposed to the elements.  Patch other hole in floor.
  • Secure drawer under bed to frame and add two small pieces of wood to support middle of bed
  • Finish painting closet and install closet door
  • Install interior crown around Fantastic Vent
  • Paint wheels
  • Install two emblems (Trailer Coach Association & small Shasta emblem)
  • Finish installing vent for AC to go on cabinet face – Still haven’t figured out the best way to do this
  • Seal cracks and staples on exterior as well as vent on roof with sealant (need to pick this up from RV Masters)
  • Finish adding all decorative items (bedding, pictures, little items for kitchen, etc)
  • Polish WINGS and reinstall (This will be my favorite part!)

If I have time: (if not, I can always do these things sometime after the party because Junebug looks ok without them for now)

  • Install baggage door
  • Install trim around bottom edge of exterior

Other things to do (non-camper related) to prepare for party: (If I run out of time this weekend, I might do these things during the week or next Friday before the party since it’s in the evening)

  • Major yard clean up in the backyard
  • Major house cleaning (my house and yard have been neglected for a while)
  • Replace fountain pump in fountain on back porch (old one broke)

 

Ok, I guess I’d better quit writing and get to work!  Lots of things still to do, but I think it’s manageable.   I’ll write another update tonight.

I’ll leave you with this original ad from the early 1960s for the Shasta Compact.

Original Shasta Compact ad

 

Kodachrome


When I was in high school, we used to listen to Simon and Garfunkel almost daily.  My friends and I loved their song Kodachrome the most and would sing along to it all the time.  I don’t know why, maybe because they sing about high school or maybe just because it’s a happy song.  Either way, the song brings back happy memories.  I’m listening to the song now as I write this, and it has a slightly different meaning to me.  He sings about how Kodachrome makes every day look like a sunny day.  I can only assume he means the film, which they discontinued in 2010.  It makes me think of Facebook and how people usually tend to post only the best and happiest photos.  I guess Facebook is my generation’s Kodachrome. haha

The reason I chose to title this post Kodachrome was because I discovered the beauty of chrome spray paint today..and I will be posting photos, so it seemed fitting.  biggrin

 

I wanted to paint the spare tire today as well as the hitch and bumper.  While I was at it, I also painted the propane tank.  I think it turned out pretty cool!

IMG_4931

First, I went to AutoZone and got the spray paint. I bought some primer as well as the chrome and purple paint for the wheel.

 

IMG_4933

Next, I cleaned the spare tire with degreaser. It’s an old tire, so hopefully I won’t need to use it. I will likely get new tires for the trailer at some point, and then I can put one of those on the spare tire mount.

IMG_4941

I taped off the tire so it wouldn’t get paint on it.

IMG_4942

After primer

IMG_4946

Purple!

spare tire_blurred license

Mounted again and I also painted the bumper with the chrome paint.

IMG_4932

This is the piece that fits over the front of the spare tire to hold it onto the bumper.

IMG_4935

After two coats of purple. I also painted the nuts. 🙂

 

And now to the front of the camper.


 

IMG_4936

After painting the hitch with primer, I noticed some numbers on the side. This must be my VIN!

IMG_4939

Primed the propane tank too

IMG_4940

Hitch is primed

IMG_4943

After one coat of chrome paint

 

I wanted to do a similar design on the propane tank as my camper will have (once I get it painted).

IMG_4945

I taped off the stripe and coated the top half with chrome.

 

IMG_4955

Getting ready to paint on the purple.

 

IMG_4962

Both colors are on and waiting for them to dry so I can pull off the tape.

 

 

IMG_4963

Finished product! I think the stripe is a little too fat but that was the only size painter’s tape I had so oh well.

I also painted a few other details that needed to be installed.

IMG_4966

This is the door catch so the front door can be propped open.

 

IMG_4952

This is the Shasta emblem that I paid a lot for. I just had to have it!

IMG_4954

Not quite the same as getting it rechromed, but it looks pretty good and a lot cheaper too!

Next, I set out to install my new Fantastic Vent.  It proved to be a difficult task (what a surprise), because I had inserted some additional framing pieces underneath the skin to make it sit a little higher (to help the water run off) and they were making the hole too small for the vent.  I couldn’t just take them out because they were all attached to make a square.  So…I had to get out my oscillating tool and saw away at the sides until I got it to be big enough for the fan to fit inside.  It took a while, but at least I finally got it installed!

IMG_4967

Hole from the interior.

IMG_4968

After trimming away at the edges and cutting out the hole in the skin.

IMG_4969

And it’s finally in!

I still need to seal it again with Dicor lap-leveling sealant. http://www.amazon.com/Pack-Dicor-Self-leveling-Lap-Sealant/dp/B00H554R98/ref=sr_1_2?ie=UTF8&qid=1409626405&sr=8-2&keywords=dicor+lap+sealant   I don’t have any, so I need to pick some up at the RV shop.  I’m keeping the cover on Junebug now anyway so I’m not in a rush to finish sealing it just yet.

IMG_4970

Here it is from the inside. I still need to add the frame piece to cover up the edges and tuck the wires in.

IMG_4996

The interior frame piece that fits around the hole for the fan sticks up too high, so I needed to trim it. Unfortunately, I didn’t have a good tool for this and ended up using my tin snips. It made the edges all jagged. I haven’t installed it yet because I want to see if I can smooth the edges first.

IMG_4997

I had to order a 12v to 115v converter so that I could power my Fantastic Vent since I don’t have 12v set up in my camper at the moment. Luckily, this part went better than my overall electrical wiring experience, and it worked the first time!

The fan works great, and I can’t wait to use it when I’m camping and don’t need the AC.

IMG_4973

My newly painted hitch and propane tank look pretty snazzy. 🙂

IMG_4979

Here’s a pic with the vent hood open. It’s translucent, so it adds a little light in the camper even when closed.

 

I installed the Shasta emblem and I think it looks really cool!  I was worried maybe you couldn’t see it very well since it’s silver and the skin is silver.  I think it still shows up just fine though.  I think I’m on the right track to finish on time now!   The electrician is coming tomorrow to make sure my wiring is done well, and then I’m on the home stretch!  smile  Have a good week and I’ll be back next weekend!

shasta emblem_edited

Sigh of Relief

Posted on

Today went much better than yesterday, all I had to do was stay AWAY from the electrical wiring.  haha  I went back to doing some other things in Junebug that I’m much better at.  I feel like I got a lot done and am feeling pretty good about how things are looking!

It was raining this morning, so I decided to run some errands before getting started.  I needed to return some things to Lowe’s and pick up some new items, plus go grocery shopping.  I finally found the other matching mirror at Target that I had been searching for so that I could install it behind the star cutout in my bench.  I already had one and needed another one.

When I got home, I started working on finishing the benches.  I also bought some spray foam gap filler so I could fill in the holes in the closet where the drains used to be.   I thought about closing the holes some other way, but this seemed like the easiest.   It worked great!  Later I will sand it down and paint over it.

IMG_4879

Here’s the hole where the power inlet used to be.

IMG_4880

These holes were for the sink drain and vent. There were galvanized pipes here, and I promptly did away with those. They were taking up way too much space!

IMG_4882

The hole after spraying some foam into it. It expanded into a bubble, it was kind of funny.

IMG_4899

After it dried, I cut the excess off with a kitchen knife. This stuff works great!

After installing the mirrors behind the star cutouts in my benches, I noticed the mirror was reflecting the backside of the wood, and it wasn’t pretty.  I decided to remove the mirrors and paint the backside purple so it would look better.  Then I reinstalled the mirrors and secured the benches to the floor.

IMG_4891

While the purple paint was drying, I decided to hang the curtains.  You can see them in the above photo, but I’ll post another one here at a different angle.  I think they look so nice against the shellacked wood!

IMG_4911

I also finished adding some wood trim around the window in the kitchen.

IMG_4904

 

My friend, Tracy, gave me this doormat with a J on it.  I’ve been using it for the house, but now I can also use it for Junebug, how perfect!  biggrin

IMG_4894

 

Next, I needed to add some vinyl welt in the seams between the walls and the ceiling.  I was supposed to do this before I attached the ceiling panels, but I totally forgot.  oops  My cutouts for the wall panels weren’t exactly the right size, so I needed to add the welt (similar to the original design) to cover up the gap.  I nailed it in using tiny nails so they weren’t too noticeable.  It isn’t perfect, but I think it looks pretty good and it covers the gap.   I actually found this welt through a boat supplier.  It’s meant for marine upholstery, but it works great for this purpose too!   http://veada.com/marine-vinyl-boat-upholstery/vinyl-welt-cord-piping.html.

 

IMG_4897

Before

IMG_4912

After

IMG_4913

Street side – after

I also added some trim pieces to the door frame.

IMG_4909

Here’s a picture of the exterior street side.  Can you spot the mistake I made cutting the new skin and had to cover up?  I don’t think it looks too bad.  You can see it, but it’s not a glaring mistake at least.

IMG_4916

 

While I was at Target, I picked up a couple of frames for my owl art that I plan to hang in Junebug.  Oh yeah, in case I didn’t mention it before, I’m obsessed with owls and plan to have an owl theme in Junebug. smile

IMG_4918

 

I was really hungry after doing all of the things I just mentioned, so I took a break and made myself a filet mignon with grilled okra and portabella mushroom.  I burned my filet a little because the grill’s fire was too hot.  Luckily, the flavor was still awesome and I thoroughly enjoyed it.  After eating, I got back to work.  I wanted to finish making the bench seats today.

In order to make the seats, I had to take apart the seat backs that I had made back in December.  I wanted to reuse the foam and material since it was so expensive.   I also removed the material from the long seat cushions since I didn’t need those to be purple anyway because they’ll be covered up with bedding.  The foam wasn’t the right size, so I had to cut it and piece together a couple of different sizes to get it to work.   Once wrapped with the batting and material, I don’t think the seam in the foam will be noticeable.

 

 

IMG_4917

Foam cut and ready for the batting.

I discovered that my good serrated kitchen knife worked great to cut through the foam!  I wish I would have discovered that the first time I was making these seat cushions.   Live and learn I guess.

IMG_4919

Batting is stapled down and the cushion is ready for the material.

 

IMG_4920

Adding the material.

 

IMG_4921

Seat cushion is complete!

 

IMG_4922

All the seat cushions and seat backs are now complete! The black cushions in back are the original ones from the camper and will be used for the bed. They are actually pretty comfortable!

IMG_4930

Seat on curb side. I added my Shasta pillow for the full effect. It looks pretty cute!

IMG_4929

Here’s the street side seat. I sat on it to try it out and it’s quite comfy!

Tomorrow, I’m planning to finish the bed and closet, then install the Fantastic Vent if it’s not raining.  If it’s raining, I may only be able to do interior work.  I also need to finish moving the hole in the floor leading to the exterior plug underneath the camper.  This wasn’t an urgent item, but it needs to be done, especially with the electrician coming on Tuesday.

I’m feeling pretty excited now that everything is coming together!  I can’t wait to get more done tomorrow.  smile